Datasheet4U Logo Datasheet4U.com

NX3DV221 - High-speed USB2.0 switch

Description

The NX3DV221 is a high-bandwidth switch designed for the switching of high-speed USB 2.0 signals in handset and consumer applications.

These applications could be cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os.

Features

  • Wide supply voltage range from 2.3 V to 3.6 V.
  • Switch voltage accepts signals up to 5.5 V.
  • 1.8 V control logic at VCC = 3.6 V.
  • Low-power mode when OE is HIGH (2 A maximum).
  • 6  (maximum) ON resistance.
  • 0.1  (typical) ON resistance mismatch between channels.
  • 6 pF (typical) ON-state capacitance.
  • High bandwidth (1.0 GHz typical).
  • Latch-up performance exceeds 100 mA per JESD 78B Class II Level A.
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exc.

📥 Download Datasheet

Datasheet preview – NX3DV221

Datasheet Details

Part number NX3DV221
Manufacturer NXP Semiconductors
File Size 1.05 MB
Description High-speed USB2.0 switch
Datasheet download datasheet NX3DV221 Datasheet
Additional preview pages of the NX3DV221 datasheet.

📁 Similar Datasheet

Other Datasheets by NXP Semiconductors

Full PDF Text Transcription

Click to expand full text
NX3DV221 High-speed USB 2.0 switch with enable Rev. 4 — 19 June 2013 Product data sheet 1. General description The NX3DV221 is a high-bandwidth switch designed for the switching of high-speed USB 2.0 signals in handset and consumer applications. These applications could be cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1 GHz) of this switch allows signal to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs.
Published: |